The key to producing the lowest cost per ton when breaking oversize material is to properly determine the correct size of hammer for the job. Factors such as the type of material, size, hardness and location need to be considered.
The Surestrike hammers are available in a variety of impact energy sizes for the many different applications found in the field. The benefit of these different size hammers allows you to choose the size of Surestrike hammer that is correct for your application at the most economical price. If you need to break smaller, softer and laminated rock, and moderate concrete demolition, the model SS25 is your best choice. If your application is larger rock or medium duty concrete demolition, the model SS40 should be considered. If you struggle to effectively break hard rock or heavy duty concrete, the model SS50 will perform to your expectations. If you have large, tough material or slag, consider the SS80. If you have a tough oversize, very heavy concrete demolition or slag application, the SS110 is a good choice. If you have the biggest, toughest and hardest rock, slag, iron ore or massive concrete demolition, the model SS150 should be your hammer of choice.
Current Surestrike Models:
Model SS25: Soft to medium rock applications such as shale, limestone, sandstone, slate, slag and concrete demolition.
Model SS40: Medium rock applications such as hard limestone, smaller granite, sandstone, slate, slag and concrete demolition.
Model SS50: Hard rock such as glacial rock, granite, basalt, slag, and heavy concrete demolition.
Model SS80: Very hard materials such as iron ore, slag and in-ground breaking.
Model SS110: Large and hard materials such as iron ore, slag and in-ground breaking.
Model SS150: The hardest and largest materials such as iron ore, slag and in-ground breaking.
|Single Blow Impact Energy – FT. LBS||25,000||40,000||50,000||80,000||110,000||150,000|
|Blows Per Minute||16||15||15||15||15||15|
|Operating Weight – LBS. (Without Bracket)||7,990||11,000||15,900||18,100||23,450||26,500|
|Operating Pressure Range – PSI||2000-2500||2000-2500||2500-3000||3000-3500||3500-4000||4000-5000|
|Hydraulic Flow Range – GPM||32-42||32-43||32-43||35-48||35-48||41-57|
|Striker Pin Diameter – Inches||6||7||8||8.37||11||11|
|Standard Striker Pin Length – Inches||27||31||33||40||42||42|
|Excavator Class – Stick Mount – LBS.||40,000||70,000||100,000||125,000||150,000||175,000|
|Excavator Class – Boom Mount – LBS.||30,000||45,000||70,000||100,000||125,000||125,000|
|Loader Class – Yards||3-4||4-5||5-6||7-8||8-9||10-11|
These specifications are representative only. For detailed specifications for your Surestrike, contact your local dealer or Surestrike.